Sand & Moulding and Quality Control
Warning: Creating default object from empty value in /home/foundrie/public_html/wp-content/uploads/espresso/templates/event_post.php on line 60
Saturday May 10, 2014 – Saturday July 26, 2014
Cnr Beit & Siemert Streets
Description:
DIPLOMA IN FOUNDRY TECHNOLOGY
1. SAND & MOULDING SANDS
2. QUALITY CONTROL
The South African Institute of Foundrymen (SAIF) is offering two courses in the following
- Sand & Moulding Sands
- Quality Control
This training initiative is supported and subsidized by the
National Foundry Technology Network (NFTN), a proud initiative of the dti
The Sand & Moulding course will be presented by Dr. Didier Nyembwe and
the Quality Control course will be presented by Mr Johan Prinsloo,
both specialized experts in their fields
The Sand & Moulding Module will consist of seven sections covering inter alia, the following:
- Moulding Sands
- Basic Test for Green Sands
- Other Test for Sands
- Principles of Moulding
- Mould Shakeout Systems
- Sand Storage and Handling
- The Pattern
The Quality Control Module will consist of fifteen sections covering inter alia, the following:
- Basic Concepts
- The Quality Gurus
- Company Wide Assessment of Quality
- Quality Improvement and Cost Reduction
- Control of Quality
- Supplier Relations
- Manufacture
- Inspection and Inspection Techniques
- Introduction to Measurement
- Quality Tools
- Quality Techniques
- Quality and Waste Elimination
- Quality Statistics
- Statistical Quality Control Charts
- Acceptance Sampling Inspection
These course is directed at team leaders, first line supervisors, operations managers
and maintenance personnel in foundries.
Learners are only permitted to register for one module at a time,
as both modules will be running at the same time.
Training will commence on Saturday, 10 May 2014
The courses will run over 8 – 10 weeks and will finish on 26 July 2014
Please Note:
There will be no lectures during the University Exam Week (31 May – 18 June 2014)
Venue: University of Johannesburg
Doornfontein Campus
John Orr Building
Metal Casting Technology Station – Room G101
Cnr Beit & Siemert Streets
Doornfontein
Times: 08:00 am – 13:00 pm
Cost Per Student: R 750.00 for the entire course.
Payment is required on registration of each student.
No registrations will be processed without the required documentation
and confirmation of payment.
Banking Details: SA Institute of Foundrymen
First National Bank
Wadeville Branch
Account Number – 50523653357
Branch Code – 251542
Confirmation of payment to be forwarded to 011 559-6526 or email mbiljon@uj.ac.za
On registration, students will be required to present a copy of their ID document
as well as copies of supporting documentation of the most recent or highest level of qualification obtained.
(e.g. Class 10 or Standard 9, Matriculation Certificate or N2 Certificate)
Kindly confirm your attendance by no later than 05 May 2014
Limited Seats are Available.
Contact Marina on 011 559-6455 or email mbiljon@uj.ac.za
for registration forms and further information.
Company Registrations:
Will not be accepted without authorized signatures from line manager.
We look forward to your attendance and assure you of our best attention at all times.
Regards